Platform lifting height 3200 mm.
Platform lifting capacity 240 kg.
The maximum speed is 50 meters / minute on the rail.
The machine has a battery of 2x105 amps.
The platform is covered with non-slip patterned aluminum sheet on steel material.
The platform has a durable motion pedal with an aluminum body.



The driver in the machine has a braking feature on it, and as soon as the user pulls his foot from the pedal, a soft braking feature is activated.
There are up-down buttons, forward-backward direction determination button, stepless speed adjustment pot, emergency stop button, voltage indicator and joystick on the control panel.



The charger is placed in a convenient place on the machine. Thanks to the indicator light on the charger, you can see the charging status of the machine. When the charging lamp changes from red to green, it means that the charging process is complete.
Our chargers have the ability to cut off electricity as soon as the batteries become fully charged, preventing the negative effects of overcharging.
The YKI-02T also has a sub-control panel. On the lower control panel there is a main switch, up-down movement buttons, a charging socket with a switch.



If the machine is forced, the card is protected and the card is prevented from failing. With 2 reset keys on the machine, you can easily activate each card again.



YKI-02T model protruding edges are free of sharp corners and designed to not damage plants during operation with a narrowed width according to its peers.
There is a self-closing security door on the Model.



A storage pocket is placed on the platform so that users can put their necessary materials.



The YKI-02T model has no space between the rail wheel and the tire wheel due to its different wheel structure. Due to the combined wheel system, rope, etc. as a result of the entanglement of substances, the disadvantages that will be experienced, such as the restriction of wheel movement and friction on the track, were prevented.
In the YKI-02T Model, all of the wheels are hidden inside the chassis. Thanks to the hidden wheels, the situation of causing undesirable work accidents (foot crushing, hitting the surroundings, etc.) is reduced.
The YKI-02T model has a total of 6 rail wheels, the front part, the middle part and the rear part.

This model has the ability to automatically rotate where it is located using the joystick or rear buttons without the need for any lifting lever.



Machine motion buttons;



Thanks to its easy maintenance and repair module, the YKI-02T Model provides convenience for the technical personnel of the greenhouse to complete their work easily and quickly. Tilt the scissor system of the machine to the front and remove the maintenance arm, which is fixed on the side of the machine, and insert it into its slot in the scissor system. YKI-02T is now ready for maintenance.